Multifunctional settings
IMAGE menu
With the IMAGE menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB1] |
| :SELECT |
PICTURE | ASPECT | 4:3 |
IMAGE | OVER SCAN | 5 |
INPUT | V POSITION | 25 |
SETUP | H POSITION | 142 |
SCREEN | H PHASE | 16 |
OPTION | H SIZE | 1344 |
EASY MENU | AUTO ADJUST EXECUTE |
Item | Description |
|
|
| Using the buttons ▲/▼ switches the mode for aspect ratio. |
| At a RGB signal |
| 4:3 ó 16:9 ó NORMAL |
| At a video signal / no signal | |
ASPECT | 4:3 | ó 16:9 |
|
|
•The NORMAL mode keeps the original aspect ratio of the signal.
•At a HDTV component video signal of 1125i (1080i) or 750p (720p), this item can’t be chosen.
•Performing the automatic adjustment initializes the aspect ratio setting.
Using the buttons ▲/▼ adjusts the
Large (It reduces picture) ó Small (It magnifies picture)
• This item can be chosen only at a video signal.
OVER SCAN • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.
•The number displayed on the menu during this adjustment is just for your reference , and might not be exact display ratio.
V POSITION | Using the buttons ▲/▼ adjusts the vertical position. | |
Up ó Down | ||
| ||
H POSITION | Using the buttons ▲/▼ adjusts the horizontal position. | |
Left ó Right | ||
| ||
| Using the buttons ▲/▼ adjusts the horizontal phase to eliminate | |
| flicker. | |
H PHASE | Right ó Left | |
| • This item can be chosen only at a RGB signal or a component | |
| video signal. |
31