Multifunctional settings
Item | Description | |
|
| |
| Using the buttons ▲/▼ adjusts the horizontal size. | |
| Large ó Small | |
H SIZE | • This item can be chosen only at a RGB signal. | |
• When this adjustment is excessive, the picture may not be | ||
| ||
| displayed correctly. In such a case, please reset the adjustment | |
| pressing the RESET button during this operation. | |
| Choosing this item performs the automatic adjustment feature. | |
| At a RGB signal | |
| The vertical position, the horizontal position, the horizontal phase, the | |
| aspect and horizontal size will be automatically adjusted. | |
| Make sure that the application window is set to its maximum size | |
| prior to attempting to use this feature. A dark picture may still be | |
| incorrectly adjusted. Use a bright picture when adjusting. | |
| At a video signal | |
| ||
| The video format best suited for the respective input signal, the | |
AUTO ADJUST | vertical position, the horizontal position phase and the aspect will be | |
EXECUTE | automatically adjusted. | |
| COMPONENT: | |
| The vertical position, the horizontal position, the clock phase and | |
| the aspect will be automatically adjusted. | |
| This function is available only when the AUTO mode is selected at | |
| the VIDEO FORMAT MENU. Refer to Page(33) of this manual. | |
| For a component video signal, the signal type is automatically | |
| identified, regardless of this function. | |
| • The automatic adjustment operation requires approximately 10 | |
| seconds. Also please note that it may not function correctly with | |
| some input. |
32