Basic operations, To project the picture | Hitachi CP-S840W/E

Basic operations

To project the picture

4

3

5

2		2	STANDBY/ON	MUTE
		2	FREEZE
			FREEZE
STANDBY/ON			MAGNIFY VOLUME
			MAGNIFY VOLUME
	INPUT		OFF
	INPUT
MUTE			POSITION ON	LASER
			POSITION ON	LASER
	MENU	7
RESET
			RESET	RIGHT
		7	MENU ON	MOUSE ON
		7	BLANK	TIMER
			RGB	VIDEO
			INPUT

ENGLISH

1

1	Turn the MAIN POWER switch of the projector on.[ I : ON]
1	∙ The ON indicator will light up orange.

2	Press the STANDBY/ON button.
2	∙ The ON indicator blinks (green) during warm-up and then lights (green).
	∙ Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
	power is turned off, since the lamp has cooled preparing for next lighting.

3	Remove the lens cap.

4	Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6	Power on all connected equipment.
6	The method of connecting various equipment, see on the page 20~28.

7	Press the INPUT button or the INPUT SELECT (VIDEO or
	RGB) button to select the source of the signal to be projected
	on the screen.	Example on-screen display
	∙ The selected signal input is displayed at the bottom right of the screen	Example on-screen display

	for 3 seconds.
			RGB1

13

Image 13

Hitachi CP-S840W/E specifications Basic operations, To project the picture

Contents

Contents FeaturesOutline Operating Guide For the Customers in U.K Power cord Video signal cablesBefore use Instructions to Users Do not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occurs Do not stare directly into the laser aperture Be careful in handling the power cord Handle the power cord carefully CleaningUse of batteries When you are not going to use for a Clean inside the unit at least once two years Do not place this unit where it gets hot When you are not going to use For a long timeVolume Cleaning the lens Names and functions of each part Contents of shipping box AC in socket Remote control sensor Main Power switchVideo input terminal RGB input terminal Remote control transmitter Names and functions of each part How to insert batteries Example of the projector and screen installation InstallationHow to use foot adjusters To project the picture Basic operations PLUG&PLAY To turn off the power Magnifying Function Freeze Function To return to the initial setting Adjustments and functionsMemory function How to use the SET UP menu SET UPBar display items VOLUME, Bright etc Numerical display items V POSIT, H Posit etc AUTO-adjustment Confirm Screen AUTO-adjustmentDuring AUTO-adjustment Adjustment Item Details of adjustment Reveal Connection to the RGB signal terminal Connection to the video signal terminals Resolution Standard Display Dots KHz Type Example of computer signal Computer/signal Horizontal Timing µs Initial set signalsComputer/signal Vertical Timing lines Control signal terminal Connection to the control signal terminal ADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication RS232C cable Reference Command data Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command error Connecting various equipment Example of system setupAC Inlet Computer Note type ComputerDesk type Air filter Filter cover Cleaning the air filter Remove the lamp cover How to replace lampLoosen two screws and pull the handle to remove Lamp Reset the lamp time Install the lamp cover and fix it using screwsLamp Message table Indicator displayOn-screen display Action When you think something wrong RCA Jack terminal Input terminal Input/Output Dimension diagramOperating guide RGB cable