Operating
Selecting An Input Signal
1 Select an input signal.
■Using the INPUT dialTurn the INPUT dial of the projector.
Turning the dial cycles through the input ports as shown below. Select the signal you wish to project.
SEARCH button
INPUT
KEYSTONE
RGB
SEARCH
BNC
ENTER
RGB BNCCOMPONENT
COMPONENT
VIDEO
RESET
MENU
VIDEO
STANDBY/ON | TEMP | LAMP |
INPUT dial
Press the SEARCH button of the projector or the remote control.
Pressing the button automatically cycles through input ports and displays the picture of retrieved signal.
memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state it was in prior to the search.
RGB BNC COMPONENT
VIDEO button
VIDEO RGB SEARCH
ASPECT PinP AUTO BLANK
RGB button
SEARCH button
VIDEO
MAGNIFY
ON
OFF
VOLUME
MUTE
2
3
Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project.
RGB BNC
■Using VIDEO buttonPress the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project.
COMPONENT
Use the ZOOM buttons to adjust the screen size.
Use the FOCUS buttons to adjust the focus.
FREEZEKEYSTONE
- FOCUS + | - ZOOM + |
POSITION | MENU |
| ENTER |
ESC | RESET |
FOCUS
FOCUS buttons
ZOOM
ZOOM
buttons
15