Hitachi CP-X1230 Freezing The Screen, Using The Magnify Feature

Operating (continued)

Freezing The Screen

Press the FREEZE button.

1 As illustrated on the right, a dialog will appear on the screen, and the screen will freeze at the current image.

	VIDEO	RGB	SEARCH
	ASPECT	PinP	AUTO BLANK
FREEZE	MAGNIFY		VOLUME
	ON
			MUTE
	OFF

FREEZE button

	Press the FREEZE button again to restore the	FREEZE	KEYSTONE
2
	screen to normal.	- FOCUS +	- ZOOM +
			MENU
	The icon “” will change to the icon “ ”. And after	POSITION
	a couple of seconds, the dialog will be closed and		ENTER
	the screen will be restored to normal.	ESC	RESET

memo The freezing feature will automatically finish if a remote control’s button that changes some display state (ex. blanking the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed.

NOTE • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.

Using The Magnify Feature

1	Press the MAGNIFY ON
	button.
	As illustrated on the right, a dialog
	will appear on the screen to aid

VIDEO RGB SEARCH

ASPECT PinP AUTO BLANK

MAGNIFY buttons

MAGNIFY

you in magnifying the picture.

MAGNIFY

ON

OFF

VOLUME

MUTE

POSITION

2	Press the POSITION button, then use the cursor
	buttons / / / to select the area to zoom.
	Press the POSITION button again to finalize the
3
	zoom area.
	Use the cursor buttons	/ to adjust the zoom
4
	level.
	Press the MAGNIFY OFF	button again to close the
5
	dialog and complete this operation.

memo The magnify feature will automatically finish if the automatic adjustment is execute, or the aspect, the signal type mode of video or the signal input state is changed.

FREEZEKEYSTONE

- FOCUS +	- ZOOM +
POSITION	MENU
	ENTER
ESC	RESET

button

Cursor buttons

19