Multifunctional Settings (continued)

AUTO Menu

With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN

ADJUST

 

PICTURE-1

POWER OFF

0 min

PICTURE-2

POWER ON

TURN ON

INPUT

SEARCH

TURN ON

AUTO

RESET

 

SCREEN

 

 

OPTION

 

 

 

 

 

: SELECT

 

 

Item

Description

 

 

Pressing the

(or the ENTER) button performs the automatic adjustment.

■At a RGB signal

The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected.

memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

■At a video signal or s-video signal

The signal type mode best suited for the respective input signal and the aspect ratio (ASPECT) will be selected automatically. And the vertical position (V POSITION), the horizontal position (H POSITION) will be

ADJUST

automatically adjusted.

■At a component video signal

The vertical position (V POSITION), the horizontal position (H POSITION) and the clock phase (H PHASE) will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected.

memo This function is available only when the AUTO is selected to the item “VIDEO” of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function.

memo This operation requires approximately 10 seconds, and the message “AUTO IN PROGRESS” is displayed during the operation.

memo This operation may not work well at some signals. If the picture becomes unstable (ex. a irregular picture, a color lack), please select the suitable mode to the item “VIDEO” of the INPUT menu.

Set the time using the / buttons. :

Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)

AUTO

AUTO

POWER OFF

POWER OFF

ENABLE

DISABLE

POWER OFF

1min

0min

 

ex.

 

 

When the time is set to 1 to 99, the projector lamp will go off and the

 

STANDBY/ON indicator begins blinking when the passed time with a proper

 

signal (without no-signal and an unsuitable signal) reaches at the set time.

 

Please refer to the section “Turning Off The Power”.

Select the TURN ON or the TURN OFF using the / buttons.:

POWER ON

TURN ON  TURN OFF

When the TURN ON is selected, you can turn the projector on without pressing the STANDBY/ON button. Please refer to the section “Turning Off The Power”.

(This table is continued to the following page.)

28