Hitachi CP-X1230 Adjusting The Projector's Elevator, Setting Up (continued), WARNING, CAUTION

Setting Up (continued)

Adjusting The Projector's Elevator

WARNING • Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn.

CAUTION • To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

1	Press and hold in the elevator buttons.
	Raise or lower the projector to the desired height and
2
	then release the elevator buttons.
	When you release the elevator buttons, the elevator
	feet will lock into position.
	As necessary, you can also finely adjust the height of
3
	the projector by twisting the elevator feet by hand.

Elevator buttons

Elevator feet

7