Hitachi CP-X206 IMAGE menu continued, Description, H Position, H Phase, H Size, Auto Adjust

IMAGE menu

IMAGE menu (continued)

Item

Description

	Using the ▲/▼ buttons adjusts the horizontal position.
	Left ó Right
	• Over-adjusting the horizontal position may cause noise to appear
	on the screen. If this occurs, please reset the horizontal position to
H POSITION	the default setting. Pressing RESET button when H POSITION is
	selected will reset H POSITION to the default setting.
	• When this function is performed on a video signal, s-video signal,
	or component video signal, the range of this adjustment depends on
	OVER SCAN (29) setting. It is not possible to adjust when OVER
	SCAN is set to 10.
	Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker.
H PHASE	Right ó Left
	• This item can be selected only for a computer signal or component
	video signal.
	Using the ▲/▼ buttons adjusts the horizontal size.
	Large ó Small
H SIZE	• This item can be selected only for a computer signal.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment by
	pressing the RESET button during this operation.
	Executing this item performs the automatic adjustment feature.
	For a computer signal
	The vertical position, the horizontal position and the horizontal phase (44)
	will be automatically adjusted. Make sure that the application window is set
	to its maximum size prior to attempting to use this feature. A dark picture may
	still be incorrectly adjusted. Use a bright picture when adjusting.
	For a video signal and s-video signal
	The video format best suited for the respective input signal will
	be selected automatically. This function is available only when
	the AUTO is selected for the VIDEO FORMAT item in the INPUT
AUTO ADJUST	menu (32). The vertical position and horizontal position will be
EXECUTE	automatically set to the default.
	For a component video signal
	The vertical position, horizontal position and horizontal phase will
	be automatically set to the default.
	• The automatic adjustment operation requires approx. 10 seconds.
	Also please note that it may not function correctly with some input.
	When this function is performed for a video signal, a certain extra
	such as a line may appear outside a picture.
	• The items adjusted by this function may vary when the FINE or
	DISABLE is selected for the AUTO ADJUST item of the SERVICE
	item in the OPTION menu (44).

30