Hitachi CP-X206, CP-X306 INPUT menu continued, Description, Video Format, Frame Lock, Computer In

INPUT menu

INPUT menu (continued)

Item Description

The video format for S-VIDEOport and VIDEO port can be set.

(1)Use the ◄/► buttons to select the input port.

(2)Using the ▲/▼ buttons switches the mode for video format.

	AUTO ó NTSC ó PAL ó SECAM
VIDEO FORMAT	N-PAL ó M-PAL ó NTSC4.43
	• This item is performed only for a video signal
	from VIDEO port or S-VIDEOport.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well for some signals. If the
	picture becomes unstable (e.g. an irregular picture, lack of color),
	please select the mode according to the input signal.

Set the frame lock function on/off for each port.

	(1)	Using the ▲/▼ buttons to select one of following ports.
	QUIT ó COMPUTER(IN)1 ó COMPUTER(IN)2
	(2)	Using the ◄/► buttons to turns the
FRAME LOCK		frame lock function on/off.
	TURN ON ó TURN OFF

•This item can be performed only on a signal with a vertical frequency of 50 to 60 Hz.

•When the TURN ON is selected, the moving pictures are displayed more smoothly.

•This function may cause a certain degradation of the picture. In such a case, please select TURN OFF.

	The computer input signal type for COMPUTER IN1 and IN2 ports can be set.
	(1) Use the ◄/► buttons to select the input port to be set.
	COMPUTER (IN)1 ó COMPUTER (IN)2
	(2) Use the ▲/▼ buttons to select the
COMPUTER IN	computer input signal type.
	SYNC ON G ON ó SYNC ON G OFF
	Selecting SYNC ON G ON allows reception of sync on G signal.
	• When SYNC ON G ON is selected, the picture may be distorted with
	certain input signals. In such a case, remove the signal connector first
	and select SYNC ON G OFF on the menu, and then reconnect the signal.

(continued on next page)

32