Hitachi CP-X306, CP-X206 OPTION menu continued, Description, My Button, My Source, Service

OPTION menu

OPTION menu (continued)

Item

Description

This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).

Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.

•COMPUTER1: Sets port to COMPUTER IN1.

•COMPUTER2: Sets port to COMPUTER IN2.

•COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)

•S-VIDEO: Sets port to S-VIDEO.

•VIDEO: Sets port to VIDEO.

•INFORMATION: Displays the INPUT -INFORMATION- (45), NETWORK -INFORMATION- (58) or nothing.

The displayed dialog is switched as below every time the MY BUTTON is pushed.

When an input signal is found:

INPUT -INFORMATION-  NETWORK -INFORMATION-  OFF

	When an input signal is not found:
MY BUTTON	NETWORK -INFORMATION-  OFF

•AUTO KEYSTONE :

Performs automatic keystone distortion correction (34).

•MY MEMORY: Loads one of adjustment data stored (28).

When more than one data are saved, the adjustment changes every time the MY BUTTON is pushed.

When no data is saved in memory, the dialog “No saved data” appears.

When the current adjustment is not saved to memory, the dialog as shown in the right appears.

If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise loading a data will lose the current adjusted condition.

•PICTURE MODE: Changes the PICTURE MODE (24).

•FILTER RESET: Displays the filter time reset confirmation dialogue (42).

•AV MUTE: Turns the picture and audio on/off.

•TEMPLATE: Makes the template pattern selected to the TEMPLATE item (40) appear or disappear.

•MY IMAGE: Displays the MY IMAGE menu (57).

	Using ▲/▼ buttons selects the picture input port to be selected with
	pressing the MY SOURCE/DOC.CAMERA button on the remote control.
MY SOURCE	Select the picture input that is connected with a document camera.
	COMPUTER (IN)1  COMPUTER (IN)2
	VIDEO  S-VIDEO  COMPONENT(Y, Cb/Pb, Cr/Pr)
	Selecting this item displays the SERVICE menu.
	Select an item using the ▲/▼ buttons, and press the ► button or the
SERVICE	ENTER button to execute the item.
	FAN SPEED AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK
	FACTORY RESET  I NFORMATION  REMOTE FREQ.

(continued on next page)

43