Hitachi CP-X206, CP-X306 user manual SCREEN menu continued, Description, Source Name, Template

SCREEN menu

SCREEN menu (continued)

Item

Description

	Each input port for this projector can have a name applied to it.
	(1) Use the ▲/▼ buttons on the SCREEN menu to
	select SOURCE NAME and press the ► button.
	The SOURCE NAME menu will be displayed.
	(2) Use the ▲/▼ buttons on the SOURCE
	NAME menu to select the port to be named
	and press the ► button. Right side of the
	menu is blank until a name is specified.
	The SOURCE NAME dialog will be displayed.
	(3) The current name will be displayed on the
	first line. Use the ▲/▼/◄/► buttons and the
	ENTER or INPUT button to select and enter
	characters. The RESET button can be used
SOURCE NAME	to erase 1 character at a time. Also if you
	move the cursor to DELETE or ALL CLEAR on
	screen and push the ENTER or INPUT button,
	1 character or all characters will be erased. The
	name can be a maximum of 16 characters.
	(4) To change an already inserted character,
	press the ▲ button to move the cursor to the
	first line, and use the ◄/► buttons to move
	the cursor on the character to be changed.
	After pressing the ENTER or INPUT button, the character is selected.
	Then, follow the same procedure as described at the item (3) above.
	(5) To finish entering text, move the cursor to the SAVE on screen
	and press the ENTER or INPUT button. To revert to the previous
	name without saving changes, move the cursor to the CANCEL on
	screen and press the ENTER or INPUT button.
	Using ▲/▼ buttons switches the mode for the template screen. The
	selected template pattern can be displayed when the MY BUTTON
TEMPLATE	allocated to the TEMPLATE function is pressed (43).
	DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2
		
	TEST PATTERN ó DOT-LINE1

40