OPTION Menu
OPTION Menu (continued)
Item | Description | |
| This item is to assign one of the following function to MY BUTTON | |
| 1 and 2 on the remote control (6). |
|
| Choose 1 or 2 on the MY BUTTON menu using the ◄/► button | |
| first. Then using the ▲/▼ buttons sets one of the following functions | |
| to the chosen button. |
|
| • RGB1: Sets port to RGB1. |
|
| • RGB2: Sets port to RGB2. |
|
| • COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr). | |
| • |
|
| • VIDEO: Sets port to VIDEO. |
|
| • INFORMATION: Displays a dialog of INPUT INFORMATION (45). | |
| • AUTO KEYSTONE EXECUTE: |
|
| Performs automatic keystone distortion correction (34). | |
| • MY MEMORY: |
|
MY BUTTON | Loads one of adjustment data stored (27). | |
| • When the current adjustment is not saved to memory a dialog is displayed. | |
| 6GORQTCT[EQPFKVKQP |
|
| /'/14; 4GECNNUCXGFRCTCOGVGTU | 0QUCXGFFCVC |
| 3WKV |
|
| If you want to keep the current adjustment, please press the ◄ | |
| button to quit. Otherwise the current adjusted condition will be lost | |
| by loading a data. |
|
•PICTURE MODE: Changes the PICTURE MODE (23).
•FILTER RESET:
Displays the filter time reset confirmation dialogue (42).
•ACTIVE IRIS: Changes the active iris mode.
•VOLUME+: Set the volume up.
•
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item.
FAN SPEED AUTO ADJUST GHOST FILTER MESSAGE KEY LOCK
SERVICE | FACTORY RESET INFORMATION REMOTE FREQ. REMOTE RECEIV. | |
FAN SPEED |
| |
|
| |
| Using the ▲/▼ buttons switches the rotation speed | (#052''& |
| of the cooling fans. The HIGH is the mode for use at | *+)* |
| highlands etc. Note that the projector is noisier when | 014/#. |
| the HIGH is selected. |
|
| HIGH ó NORMAL |
|
(continued on next page)
43
