Hitachi CP-X600 Using the Transition Detector Function, OPTION Menu continued, Description

CHECK PASSWORD

BOX

64#05+6+10&'6'%614

%1/2.'6'



'06'4 ':+6

PASSWORD BOX

64#05+6+10&'6'%614

674010 67401((

Transition Detector

on/off menu

64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF

HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP



2+0$1:



+H[QWYKUJVQJCXGCUSWCTGKOCIG

QPUETGGPCICKP

FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

Transition Detector Alarm

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

•Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the

ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle and mirror setting will be recorded.

NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected.

4.1-2 If this function is set to TURN ON when the vertical angle of the projector or mirror setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.

4.2 Setting the Transition Detector PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu.

4.2-2 Use the ▲/▼ buttons on the Transition Detector on/off menu to select TURN ON. The ENTER PASSWORD BOX (small) will be displayed.

4.2-3 Use the ▲/▼/◄/► buttons to enter a PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX (small) and press the ► button to display the CHECK PASSWORD BOX, enter the same PASSWORD again.

64#05+6+10&'6'%614 '06'42#55914&



37+6 0':6

ENTER PASSWORD

BOX (small)

64#05+6+10&'6'%614 %*'%-2#55914&



37+6 0':6

4.2-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the

►button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time.

Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the Transition Detector on/off menu.

• Please do not forget your Transition Detector PASSWORD.

(continued on next page)

50