INPUT Menu

INPUT Menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

/'07=4)$?

5'.'%6

2+%674'





241)4'55+8'68

+/#)'

8+&'104/+&

+0276

&;%556+..

5'672

%1.1452#%'#761

#7&+1

%1/210'06%1/210'06

8+&'1(14/#6#761

5%4''0



 

126+10

(4#/'.1%-674010

4)$+0

 

'#5;/'07

 

4'51.76+10

 

 

 

Item

Description

 

Using the ▲/▼ buttons switches the progress mode.

 

TV ó FILM ó TURN OFF

 

• This function is performed only for an interlaced signal of a VIDEO

 

input, an S-VIDEO input or COMPONENT VIDEO input of 525i

PROGRESSIVE

(480i), 625i (576i) or 1125i (1080i) signal.

• When TV or FILM is selected, the screen image will be sharp.

 

 

FILM adapts to the 2-3 Pull-Down conversion system. But these

 

may cause a certain defect (for example, jagged line) of the picture

 

for a quick moving object. In such a case, please select TURN OFF,

 

even though the screen image may lose the sharpness.

 

Using the ▲/▼ buttons switches the noise reduction mode.

 

HIGH ó MID ó LOW

This function performs only at a VIDEO input, an S-VIDEO or

VIDEO NR COMPONENT VIDEO input of 525i(480i), 625i(576i) or 1125i (1080i) signal.

When this function is excessive, it may cause a certain degradation of the picture.

 

Using the ▲/▼ buttons switches the 3D-YCS mode.

 

STILL ó MOVIE ó TURN OFF

3D-YCS

• This function performs only at a VIDEO input of NTSC, and PAL.

• MOVIE is the mode for images with a lot of motions like movies,

 

 

and STILL is the mode for images with few motions or completely

 

still ones like slides.

 

Using the ▲/▼ buttons switches the mode for color space.

 

AUTO ó RGB ó SMPTE240 ó REC709 ó REC601

COLOR SPACE

• This item can be selected only for an RGB signal or a component

 

video signal (except 525i (480i), 625i (576i) and SCART RGB).

 

• The AUTO mode automatically selects the optimum mode.

 

• The AUTO operation may not work well at some signals. In such a

 

case, it might be good to select a suitable mode except AUTO.

(continued on next page)

30

Page 30
Image 30
Hitachi CP-X600 user manual Input Menu, Progressive, 3D-YCS, Color Space