OPTION Menu
OPTION Menu (continued)
Item |
| Description |
|
| |
| Using the ▲/▼ buttons adjusts the time to count down to | |
| automatically turn the projector off. | |
| Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) | |
| AUTO OFF | AUTO OFF |
| ENABLE | DISABLE |
| 0 | |
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | |
When the time is set to 1 to 99, and when the passed time with no- | ||
| signal or an unsuitable signal reaches at the set time, the projector | |
| lamp will be turned off. |
|
| If one of the projector's buttons or the remote control buttons | |
| is pressed or one of the commands (except get commands) is | |
| transmitted to the control port during the corresponding time, | |
| projector will not be turned off. | |
| Please refer to the section “Turning off the power” (17). | |
| The lamp time is the time counted after the last resetting. It is | |
| shown in the OPTION menu as the usage time of the lamp. | |
| Pressing the RESET button on the remote control or the ► button | |
| of the projector displays a dialog. | |
LAMP TIME | To reset the lamp time, select the RESET using the ▲ button. | |
| RESET ï CANCEL |
|
•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
•For the lamp replacement, see the section "Lamp" (59, 60).
| The filter time is the time counted after the last resetting. It is shown |
| in the OPTION menu as the usage time of the air filter. |
| Pressing the RESET button on the remote control or the ► button |
| of the projector displays a dialog. |
FILTER TIME | To reset the filter time, select the RESET using the ▲ button. |
| RESET ï CANCEL |
•Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.
•For the air filter cleaning, see the section "Air filter" (61, 62).
(continued on next page)
44
