Hitachi CP-X608 user manual Encryption, Speed, Network Mode

0'6914-/1&'

9+4'.'55

9+4'&

MIU Menu

MIU Menu (continued)

Item	Description
	MODE
	Use the ▲/▼ buttons to select the mode of	/1&'
	the network communication system. Select it	#&*1%
		+0(4#5647%674'
	according to the setting of your PC.
	ADHOC  INFRASTRUCTURE
	CH
	Use the ▲/▼ buttons to select the channel	%*
	of the wireless LAN while using it. Select it	
	according to the setting of your PC.
	The channels 1 to 11 are available.
	• The available channels would be various depending on a country.
	In addition, wireless LAN card might be required due to the
	standard.
	ENCRYPTION	'0%4;26+10
	Use the ▲/▼ buttons to select the encryption	92#25- #'5
	method to be used.	92#25- #'5
		92#25- 6-+2
		9'2DKV
		9'2DKV
		1((
SETUP	WPA2-PSK(AES)
	ô
(continued)
	WPA-PSK(AES)  WPA-PSK(TKIP)  WEP 128bit  WEP 64bit  OFF

SPEED
Use the ▲/▼ buttons to select the transfer rate.
(M : Mbps : Megabits per second)
AUTO54M48M36M24M18M		
ô	ô	
1M2M5.5M6M9M11M12M		
• The AUTO mode automatically selects the		
		
optimum rate.		
• Transfer rates may change due to the network		
		/
situation.

NETWORK MODE

Use the ▲/▼ buttons to select the network mode.

WIRELESS  WIRED

•The network mode will be initialized whenever the power is turned on with the power switch.

•The WIRELESS will be enabled when the wireless network card is installed.

•The WIRED will be enabled when the wireless network card is not installed.

(continued on next page)

57