Hitachi CP-X608 user manual MIU Menu, Setup

&*%2

674010

67401((

/+75'672

&*%210 +2#&&4'55 57$0'6/#5- &'(#7.6)#6'9#; 6+/'&+(('4'0%' '#0&6+/' /1&' %*

'0%4;26+10 52''& 0'6914-/1&'

MIU Menu

MIU Menu (continued)

Item

Operation

Selecting this item displays the e-SHOT menu.

Use the ▲/▼ buttons to select an item which	G5*16
is a still image by the e-SHOT ( 4.7 e-SHOT	+/#)'	24'5'06#6+10(+.'
(Still Image Transfer) Display of the User’s	+/#)'	&'/10564#6+10
	+/#)'	6#$.'
	+/#)'	&'/10564#6+10
Manual - Network Functions) and the ► or
ENTER button to display the image.

•Insert the SD memory card or USB memory into the projector before you use the e-SHOT function. (12)

•The item without image stored cannot be selected.

•The image names are each displayed in 16 characters or less.

•Japanese file name is displayed correctly only when the projector’s language is set to Japanese. And the characters other than alphanumeric character are not displayed correctly in Japanese mode. (Ç, ä, etc.)

e-SHOT	To switch the image displayed
	Use the ▲/▼ buttons.
	To return to the menu
	Press the ◄ or ESC button on the remote control.
	To erase the image displayed and its source file in the SD card
	or USB memory
	(1) Press the RESET button on the	G5*16
	remote control while displaying	4'5'6+/#)'
	an image to display the e-SHOT -	'5%	'06'4;'5
	RESET menu.

(2)Press the ENTER button on the remote control or the INPUT button on the projector to perform to erase.

To stop erasing, press the ◄ button and INPUT button on the projector.

Selecting this item displays the MIU SETUP menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.

SETUP

DHCP (Dynamic Host Configuration Protocol)

Use the ▲/▼ buttons to turn DHCP on/off.

TURN ON  TURN OFF

• Select TURN OFF when the network does not have DHCP enabled.

(continued on next page)

55