Outline, Features, ContentsPage | Hitachi CP-X955W/E instruction

Liquid Crystal Projector

Model name

CP-X955W/E

OPERATING GUIDE

Thank you very much for purchasing this Hitachi Liquid Crystal Projector.

Please read this operating guide to use correctly. After reading this manual, keep it carefully for future reference.

Outline

This Liquid Crystal Projector can display various computer signals and NTSC/PAL/SECAM video signals.

Features

(1) High brightness

A highly efficient optical system with a metal halide lamp ensures high brightness.

(2) High resolution

Three separate high-definition liquid crystal panels are used for the R, G and B signals.

(3)Compact size, light weight for portability

(4)RGB output terminal

(5)RS232C Communication

(6)Mouse emulation

(7)Power zoom and power focus functions

(8)Complies with VESA DDC1/2B specifications

ContentsPage

Before use	3
Names and functions of each
part	8
Installation	11
Basic operations	12
Adjustments and functions ..	14
Connection to the video signal
terminals	19
Connection to the RGB signal
terminals	19
Connection to the control
signal terminal	22
Example of system setup ....	27
Cleaning the air filter	27
Lamp	28
Message table	28
When you think something
wrong	29
Specifications	30

Image 1

Hitachi CP-X955W/E specifications Outline, Features, Operating Guide, ContentsPage

Contents

ContentsPage FeaturesOutline Operating Guide For the Customers in U.K Power cord Video signal cablesBefore use Video inputs LDo not install this unit in an unstable Do not look directly at the lens when the lamp is litDo not use power supplies LIf any abnormality occurs Do not stare directly into the laser Aperture Be careful in handling the power cord Cleaning Handle the power cord carefullyClean inside the unit at least once two years When you are not going to use for a long time Volume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinet Main unit Names and functions of each partStandby / on Laser on Remote control transmitterDisk PAD Remove the battery compartment cover Installation of liquid crystal projector InstallationView from the top View from the side View from the front View from the side To project the picture Basic operations Press the STANDBY/ON button, for 1 second Plug & Play Press the Menu buttons or the Menu on / OFF button Adjustments and functions Brightness SET UPColor Size Image Input Blank OPT. OptionReveal COM. Bits Language Connection to the RGB signal terminal Connection to the video signal terminals Example of computer signal Connection to the RGB signal terminal Data Hsync Initial set signals Control signal terminal Connection to the control signal terminalMouse emulation Connection to the control signal terminal Communication Control command code Control data table Procedure of getting the Projector status Cleaning the air filter Example of system setupConnecting various equipment Re-install the air filter Clean the air filter using a vacuum cleanerLamp Message table Indicator display When you think something wrong Dimension diagram