Manuals / Hitachi / Computer Equipment / Projector

Hitachi CP-X955W/E specifications Basic operations continued, To turn off the power, Plug & Play

Models: CP-X955W/E

1 30

Download 30 pages 32.79 Kb

Page 13

Basic operations (continued)

Basic operations (continued)

To turn off the power

1

1	STANDBY/ON	MUTE
	STANDBY/ON	MUTE
	FOCUS ZOOM	VOLUME
	POSITION ON	LASER

2	RESET	RIGHT
2	MENU ON	MOUSE ON
	BLANK	TIMER
	RGB 1/2	VIDEO 1/2

3

INPUT

1 Press the STANDBY/ON button, for 1 second.

•The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and the indicator blinks orange.

•Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in standby mode.

2

3

Turn the MAIN POWER switch of the projector off. [ª: OFF]

Turn the lens cover lever up.

• Lens cover closes.

Caution Do not turn off the MAIN POWER switch before pressing the STANDBY/ON button. After

the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the projector. Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.

PLUG & PLAY

This projector complies with VESA DDC1/2B specifications. PLUG & PLAY is a system with computer, peripherals (including projectors), and operating system.

It works when the projector is connected to DDC (Display Data Channel) ready computer that is running an operating system software that incorporates plug & play functionality.

(Only RGB 1)

13

Image 13

Hitachi CP-X955W/E Basic operations continued, To turn off the power, Plug & Play, Turn the lens cover lever up

Contents

ContentsPage Features2 High resolution 3 Compact size, light weight for portability 4 RGB output terminalWARNING THIS EQUIPMENT MUST BE EARTHED IMPORTANT FOR THE CUSTOMERS IN U.KIMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS2 Power cord 1 Video signal cablesBefore use Warning CautionL Do not look directly at the lens when the lamp is lit Safety precautionLDo not install this unit in an unstable L Do not use power suppliesL Do not stare directly into the laser aperture L Be careful in handling the power cordC A U T I O N L Cleaning L Handle the power cord carefullyL Clean inside the unit at least once two years L When you are not going to use for a long timeL Volume L Do not place this unit where it gets hotL Cleaning the lens L Cleaning the cabinetMain unit Names and functions of each partNames and functions of each part continued Remote control transmitterª Insert the batteries as illustrated inside the battery compartment Á Remove the battery compartment coverCaution Cautions on use of batteries £ Replace the cover Caution Cautions on useExample of the projector and screen installation InstallationHow to use foot adjusters Installation of liquid crystal projectorTo project the picture Basic operationsI ON +++FOCUS+++Turn the MAIN POWER switch of the projector off. ª OFF To turn off the powerBasic operations continued PLUG & PLAYTo return to the initial setting Adjustments and functionsMemory function 1 Press the MENU buttons or the MENU ON / OFF buttonSET UP Adjustments and functions continuedIMAGE INPUTAdjustments and functions continued TEST PATTERNAdjustments and functions continued OPT. OPTIONThe menu OPT. allows you to control communication function etc MIRRORTIMER Adjustments and functions continuedCOM. SPEED COM. BITSConnection to the RGB signal terminal Connection to the video signal terminals1. Input signal 2. Signal input terminal3. Example of computer signal Connection to the RGB signal terminal continued4. Initial set signals Connection to the RGB signal terminal continuedDATA HSYNC DATA VSYNC1. Control signal terminal Connection to the control signal terminal2. Mouse emulation PS/2 mouse ADB Mac mouse Serial mouse Connection to the control signal terminal continued4. Control command code Connection to the control signal terminal continuedControl command table 3. CommunicationConnection to the control signal terminal continued Control data tableThe procedure of setting the Projector status The procedure of getting the Projector statusThe procedure of default setting the Projector status The example of command errorCleaning the air filter Example of system setupConnecting various equipment 2 Remove the air filter from the bottom3 Clean the air filter using a vacuum cleaner Cleaning the air filter continued4 Re-install the air filter LampIndicator display When you think something wrongCheck the following again before asking for service If the trouble cannot be recovered, consult your dealerAll dimensions shown in inches Dimension diagram