Hitachi DH 24 PF instruction manual Standard Accessories, Sold separately

English

ACCESSORIES

WARNING: ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool.

The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

NOTE:

Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES
(1)Plastic Case (Code No. 323129)	1
(2)Side Handle (Code No. 303659)	1
(3)Depth Gauge (Code No. 310331)	1
OPTIONAL ACCESSORIES	sold separately

1. Drilling anchor holes (Rotation + Hammering)

◯Drill Bit (Slender shaft)

(1) Drill Bit (Slender	(2) Adaptor for slender shaft
Shaft)	(SDS-plus shank)

	(1) Drill Bit (Slender Shaft)			(2) Adaptor for
				Slender Shaft
Outer diameter	Effective Length	Overall Length	Code No.	Code No.
1/8"	1-25/32"	3-35/64"	306369
(3.4 mm)	(45 mm)	(90 mm)
				306370
9/64"	1-25/32"	3-35/64"	306368
(3.5 mm)	(45 mm)	(90 mm)

20