Hitachi DS 18DMR Failure to observe the following can result, Not mix old and new batteries

English

1.2	Using as an auxiliary light
(1)	Press the switch to turn off the light.	Switch
	If forgotten, the light will turn off
	automatically after 15 minutes.
(2)	The direction of the light can be adjusted
	within the range of hook positions 1 - 5. (Fig.
	11)
	◯ Lighting time	Hook
	AAAA manganese batteries: approx. 15
		Fig. 11
	hrs.

AAAA alkali batteries: approx. 30 hrs.

CAUTION:Hook

● Do not look directly into the light.

Such actions could result in eye injury.

1.3	Replacing the batteries
(1)	Loosen the hook screw with a phillips-head		Phillips-head
	screwdriver (No. 1). (Fig. 12)	Screw
			screwdriver

Remove the hook cover by pushing in the	Fig. 12
direction of the arrow. (Fig. 13)

(2)Remove the old batteries and insert the new batteries. Align with the hook indications and

	position the plus (+) and minus (-) terminals		Arrow
	correctly. (Fig. 14)
(3)	Align the indentation in the hook main body
	with the protuberance of the hook cover,
	press the hook cover in the direction opposite
	to that of the arrow shown in Fig. 13 and then
	tighten the screw.
	Use commercially available AAAA batteries		Hook cover
	(1.5 V).
			Fig. 13
NOTE:			Hook main body
	Do not tighten the screw excessively. Such
	action could strip the screw threads.
	CAUTION:	Inden-	Protube-
		tation
●	Failure to observe the following can result		rance
	in battery leakage, rust or malfunction.	AAAA	Protube-
	Position the plus (+) and minus (-) terminals batteries		rance
	correctly.
	Replace both batteries at the same time. Do		Hook cover
	not mix old and new batteries.		Indentation
	Remove exhausted batteries from the hook		Fig. 14
	immediately.

●Do not discard batteries together with normal trash and do not throw batteries into fire.

21