Antenna Connections
CAUTION:
When installing an outdoor antenna, follow the installation instructions in the attached “IMPORTANT SAFETY INSTRUCTIONS”.
FM outdoor antenna (not supplied)
AM loop antenna
Antenna discharge unit (not supplied)
FM indoor antenna lead wire
FM 75Ω
AM
LOOP
FM antenna
The FM indoor antenna lead wire is sufficient to receive most local FM broadcasts and should be connected to the rear FM 75Ω terminal. Extend the antenna lead wire as straight as possible and, while listening to the sound from the system, secure it in a position where the best FM reception is found.
In fringe areas, or where reception is distorted or noisy, an FM outdoor antenna (not supplied) should be connected instead of the FM indoor antenna lead wire. The terminals will accept 75- ohm coaxial cable.
AM antenna
The AM loop antenna is sufficient to
receive most local AM broadcasts. 1
2 Assemble the loop antenna.
Unwind the antenna wires, then | 1 | |
connect them to the AM LOOP |
| |
terminals. Place the loop antenna in a |
| |
position which yields the best AM | 3 | |
reception, or attach it to a wall or other | ||
2 | ||
surface as shown. |
|
NOTE:
To minimize noise...
•Keep the speaker wires, power cord and all other system connection cables away from the loop antenna.
•Do not place the antenna close to a TV or speaker.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Section
ANT | VIDEO 1 | VIDEO 2 | COMPONENT | VIDEO OUT SELECT | MONITOR OUT | ||
| VIDEO IN | VIDEO OUT | VIDEO IN | VIDEO OUT | (DVD ONLY) | VIDEO | |
|
|
|
|
|
| (DVD ONLY) |
|
FM |
|
|
| Y |
|
|
|
|
|
|
|
|
|
| |
75Ω |
|
|
|
| COMPONENT |
|
|
| AUDIO IN | AUDIO OUT | AUDIO IN | CB/PB |
|
|
|
|
|
|
|
| |||
AM |
| L | L |
|
|
|
|
LOOP |
|
|
| CR/PR | VIDEO OUT |
|
|
|
|
|
|
| SCAN SELECT |
|
|
|
| R | R |
| SELECTABLE INTERLACE |
| |
|
|
|
|
|
| ||
R | L CENTER | R | L SUB WOOFER |
| FRONT | SURROUND | |
| SPEAKERS 8Ω |
|
|
