DV-P315U-E-P25-46 01.4.10 10:55 AM ページ 37

Using the Zoom and Surround Functions

3D Off

NOTES

3D Sound is possible only on discs recorded using DOLBY SURROUND or

DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals.

Depending on the disc, the Zoom and Surround function may not work.

Using the Zoom Function (DVD/VCD)

1 During playback or pause mode, press the ZOOM button on the remote. A pointer will be displayed on screen.

2

Use the UP/DOWN or

LEFT/

RIGHT button to select the part of the

screen you want to zoom.

3 Press the ENTER button.

-During DVD playback, press ENTER to zoom in 2X/4X/normal.

-During VCD playback, press ENTER to zoom in 2X/normal.

Using the Surround Function

The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect.

This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs.

(Discs which are recorded with LPCM or DTS will not work. When the DIGITAL OUTPUT is set to BITSTREAM in the Setup Menu, the 3D Sound function will not work.)

1 During playback, press the SURROUND button.

-The SURROUND mark will be displayed on screen. (Be sure the DIGITAL OUTPUT is set to PCM.)

2 Press the UP/DOWN button to turn the Surround feature on or off.

FUNCTIONS

ADVANCED

 

 

37

ENGLISH

Page 37
Image 37
Hitachi DVP315U Using the Zoom and Surround Functions, Using the Zoom Function DVD/VCD, Using the Surround Function