
Setting Up the Audio Options
AUDIO OPTIONS
1 | Digital Output | PCM |
2 | DTS | Off |
3 | Dynamic Compression | On |
RETURN |
| Press the SETUP button when in stop | ||
1 mode. |
|
| |
2 | Use the | UP/DOWN button to select Audio | |
Options.Then press the ENTER button. | |||
| Use the | UP/DOWN button to select the | |
3 desired item.Then press the | LEFT/ |
RIGHT button.
DIGITAL OUTPUT
1PCM : Converts to PCM(2CH) 48kHz/16bit audio.
Select PCM when using 3D sound.
2BITSTREAM : Converts to Dolby Digital BITSTREAM (5.1CH). Select BITSTREAM when using the Dolby Digital Audio Output.
NOTE : Be sure to select the correct Digital Output.
DTS
1ON : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS DECODER.
2OFF : Doesn't output DTS signal.
DYNAMIC COMPRESSION
1ON : To select dynamic compression.
2OFF : To select the standard range.
NOTES
・If the selected language is not recorded on the disc, the original
・Howto make the current Menu disappear and return to Setup Menu during set
up;
Press RETURN button.
42
ENGLISH