Hitachi DVRF7U Variable Search System, End search, Scan and play, Go to 00000 stop

Variable Search

System

Press the FUNCTIONS button to display the search screen in the stop or playback mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is probably because the cassette was recorded on a VCR without VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program.

1	Go to [0:00:00] stop
	Use this feature when you want to search for the
	[0:00:00] counter position on a cassette. Press the
	CANCEL button at the point on the tape where you
	want to set the counter to [0:00:00].
	With the VCR in the stop or playback mode, press the
	FUNCTIONS button. The VCR will rewind or fast
	forward, searching for the [0:00:00] counter position,
	and then automatically stop at that position.
		VCR
		Go to Zero
		End Search
		Forward Intro Scan
		Reverse Intro Scan
		MOVE	SELECT

2	End search
	Use this feature when you want to search for a blank
	position to record a program on a cassette. With the
	VCR in the stop or playback mode, press the
	FUNCTIONS button. The VCR will fast forward,
	searching for a blank position, and then automatically
	stop at that position. If the VCR reaches the end of the
	tape during end search, the tape will be ejected.

3	Scan and play
	Use scan and play when you don’t know exactly

where a program is located on a cassette tape. - Forward Intro Scan

Highlight “Forward Intro Scan”, then press the ENTER button.

- Reverse Intro Scan

Highlight “Reverse Intro Scan”, then press the ENTER button.

When the program you want to watch appears, press the PLAY button.

Playback

English - 59