Hitachi DVRF7U Not be restored. will be displayed, Button to return to the Disc Navigation screen

7	Press the ENTER button at the end point.
8	The image and time at the end point are displayed the
	end point window.

DVD-RAM(VR)					Edit Title
				Title No.05
					Start
					End
			Start	00:00:00
		00:03:50			Delete
JUN/28/2004 01:16AM CH51
JUN/28/2004 01:16 AM			End	00:03:50	Return
MOVE	SELECT			RETURN

9	Press the 34buttons to select Delete, and then press
	the ENTER button.
	• Message “Do you want to delete? (Deleted part will
	not be restored.)” will be displayed.
	• If you want to cancel deletion, press the RETURN
	button to return to the Disc Navigation screen.
		DVD-RAM(VR)								Edit Title
									Title No.05
					Do you		want	to delete?		Start
				(Deleted part			will	not be restored.)
								Start	00:00:00	End
									No
						Yes
						00:03:50				Delete
			Jun/28/2004 01:16AM CH51
			Jun/28/2004 01:16 AM							Return
								End	00:03:50
			MOVE	SELECT					RETURN

Press the MAIN MENU button again to exit the menu

10 after the operation is finished. The Disc Navigation screen will disappear.

Editing

■The length of the selection to delete should be at

Note least 5 seconds long.

■If the length of the section to delete is less than 5 seconds, you will be prompted with the message “The range is too short”.

■If the end time precedes the start time, you will be prompted with the message “End point cannot be marked earlier than start point”.

Displaying a List of Scenes (Scene Navigation)

DVD-RAM RW VR

•Scene Navi. allows you to display a list of the scenes recorded on DVD-RAM disc using a DVD video camera/recorder.

•Scene Navi. also allows you to display the scenes with markers attached to the program recorded on this DVD Recorder-VCR (see “Using Markers/Bookmarks” on page 48).

•You can start playback from any selected scene using the Disc Navigation screen.

•Use 8-cm DVD-RAM discs after removing them from cartridges.

1	Press the DISC NAVIGATION button in the playback
	or stop status.
2	Use the 34buttons to select a program, and then
	press the ENTER button.
3	Use the 34buttons to choose “Scene Navi.”, and
	then press the ENTER button.
	• If the scene has no marker, “This [Menu] is not
	available because this title list has no scene” will
	appear.
4	Use the 21buttons to select the desired scene, and
	then press the ENTER button.

• Playback will start from the selected scene.

84 - English