English
126
[When using Macintosh]

USING PIXE VRF BROWSER EX AND IMAGEMIXER VCD/DVD2

Pixe VRF Browser EX allows you to import the images on DVD-RAM/DVD-RW/DVD-R recorded
on the DVD video camera/recorder into PC as an MPEG file. ImageMixer VCD/DVD2 allows you to
use the images imported by Pixe VRF Browser EX to create a DVD-Video (DVD-RW/DVD-R).
The following shows the basic operations of Pixe VRF Browser EX and ImageMixer VCD/DVD2.
Refer to the electronic instruction manuals that can be read on PC for detailed instructions of Pixe
VRF Browser EX and ImageMixer VCD/DVD2. See the electronic instruction manuals for the
detailed use method of each software program.
For Pixe VRF Browser EX, click “Help” - “Pixe VRF Browser EX Help” while it is being started up.
For ImageMixer VCD/DVD2, click the question ? mark at the top right of the folder select screen.
To start Pixe VRF Browser EX and ImageMixer VCD/DVD2, double-click the “Pixe VRF Browser EX
for DVDCAM” icon and “ImageMixerVCD/DVD2” icon in Macintosh HD (startup disk) -
“Applications” - “ImageMixer for DVDCAM”.
Note:
The provided software cannot be used to burn a DVD-VR (DVD-RAM/DV D -RW): It is also incompatible with a
+RW.

IMPORTING IMAGES RECORDED ON DVD-RAM/DVD-RW/D VD-R INTO PC

TO CREATE A DVD-VIDEO (DVD-RW/DVD-R)

You can use the images recorded on the DVD video camera/recorder to create a disc that can be
viewed on DVD recorders/players.
* Any DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalized.
1Connect the DVD video camera/recorder
with no disc loaded to a USB port of
Macintosh.
* If you connect the DVD video camera/
recorder while a disc is loaded, you will
have to remove the disc later.
2Start Pixe VRF Browser EX and choose the
drive.
Clicking the “Drive” icon will display the
drive select screen. Choose “HITACHI DVD-
RAM DZ-GBX3”, and then click “OK”. The
cover of disc insertion block on DVD video
camera/recorder will automatically open.
3Set a disc.
Set a disc whose recorded video file you wish
to import in the DVD video camera/recorder,
close the cover of disc insertion block, and
then click “OK”.
Click
Click
Click