English
Inserting and Removing Disc
1 Press down the DISC EJECT button once and release it.
A few moments after the ACCESS/PC |
|
indicator blinks, the cover of disc insertion | Pickup lens |
block will open. |
2 Gently open the cover by hand fully until it stops.
DISC EJECT
3 When inserting a disc:
Push the disc against the turntable at the center to lock it until a click is heard.
•Note that the recording surface of disc must face the inside of DVD video camera/recorder. When using a
•Never touch the disc recording surface or pickup lens. Touching the pickup lens could cause a fault.
•Use the disc cleaning cloth provided to wipe off any dirt adhering to the disc recording surface.
•Do not use a dirtied or scratched disc.
4 Push the section marked “PUSH CLOSE” on the cover of disc insertion block, to close the cover.
Then the DVD video camera/recorder will automatically recognize the disc: While the ACCESS/PC indicator is lit, do not cut off the power supply, and do not subject the DVD video camera/recorder to any vibrations or impact.
Push the shaded portion.
When removing the disc:
While pushing down the center portion of turntable, pick up the disc, holding its edge, to remove it.
Turntable
38
