1<>2/3
VIEWING ON TV SCREEN
English
1 Turn the TV on and set the input selector to “VCR” whichever applicable Video input.
Refer to the TV instruction manual for how to switch the TV input.
2 Turn the DVD video camera/recorder on.
The image that the DVD video camera/ recorder is seeing will appear on the TV screen.
You can also monitor the image on the LCD screen or viewfinder of the DVD video camera/recorder.
3 Perform playback, recording or editing.
You can perform playback, editing or editing on Disc Navigation while checking on TV screen.
Note:
•Adjust the volume of sound on TV.
•The infrared remote control is useful when operating the DVD video camera/recorder while viewing an image on TV screen. However, if you use a Hitachi VCR, the remote control may inadvertently operate the VCR if it is near the DVD video camera/recorder. To prevent this, set the remote control code of the VCR to a position other than “VCR2”.
•Information that the DVD video camera/recorder is recording will appear on the TV screen: You can also display only part of information or switch off the display. Refer to “SETTING
•When
•If you use TV with wide mode (aspect ratio 16:9) and set the TV to the wide mode, the entire Disc Navigation display may not be displayed on the TV screen. If this happens, release the wide mode setting on TV (see the TV instruction manual for releasing the wide mode).