Hitachi DZ-GX3100A Switching Quality of Still Image Quality, Setting Content On-screen display

English

3

SWITCHING QUALITY OF STILL IMAGE (QUALITY)

You can switch the still recording quality only when using card.

It is recommended that you use “FINE” when recording vital images (p. 152 “SIZE AND QUALITY OF PHOTOS”).

1 Press the MENU button, use the f/e/ d/c/Abuttons to choose “Quality” on the “Record Functions Setup” menu screen, and then press the Abutton.

2 Choose the option you want, and then press the Abutton.

3 Press the MENU button to end the setting.

Note:

•The still quality setting will be stored in memory even when the DVD video camera/recorder is turned off.

•The quality of photos recorded on DVD-RAM is equivalent to “FINE” on card.

1<>2/3

RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)

If you wish to input an image from another device to this DVD video camera/recorder, you must first switch the setting on the DVD video camera/recorder.

Refer to the explanation starting from page 109 on how to connect the DVD video camera/recorder to other devices or record images input from them.

The DZ-BX35A cannot receive any externally input signal.

Setting	Content	On-screen display
CAMERA	Usually select this option	No display
LINE	To input image from another device	L IN
S LINE	To input S-VIDEO signal from another device	S IN

1 Press the MENU button, use the f/e/ d/c/Abuttons to choose “Input Source” on the “Record Functions Setup” menu screen, and then press the Abutton.

2 Choose “LINE”, and then press the A button.

3 Press the MENU button to end the setting.

Note:

The “Input Source” setting will return to “CAMERA” whenever the DVD video camera/recorder is turned off.

64