Hitachi DZ-HS903A, DZ-HS803A instruction manual Additional Information, 162

Additional Information

Symptom	Cause and Correction	Reference
		page
Not displayed	DVD-RAM, DVD-RW(VR mode) recorded on this
normally in the disc	camcorder and edited on another device may not be
navigation screen.	displayed normally in the disc navigation screen. In this
	event, use “Update control info.”.
	If too much time is required to display the HDD disc
	navigation screen, try the following.

1 Press , then press MENU.

2 Select “Disc setting” or “HDD setting” by pressing c,

then press the confirmation button.

—

The “Update Control info.” confirmation screen appears.

3 Select “YES” by pressing d, then press the confirmation button.

Update of control information will begin. While “Updating...” is being displayed, a black screen may appear (and time may be required).

(There are some DVD which cannot be used even by following the above procedures.)

Photos on a card	This camcorder can play back images from an SD
cannot be played	memory card recorded on other digital cameras
back.	conforming to the DCF (Design rule for Camera File
	system) standard. The playable pixel range of image data
	on this camcorder is from 80×60 to 4000×3000
	(horizontal/vertical). If the pixel data is outside this
	range, blue thumbnails will appear (thumbnails* in “Fig.
	1”), meaning the image is unplayable.

Fig. 1
Al l	scenes		1/ 6
			—
	PLAY	PHOTO SELECT
		*

Even when the number of pixels is within the above range, playback may not be possible, depending on the recording status of the digital cameras used.

DCF (Design rule for Camera File system) is a unified image file format for digital cameras. Image files recorded using digital devices conforming to DCF can be used in these devices interchangeably.

It takes some time to	Stills with a large number of pixels will take more time to
play back photos on	appear.	—
card.

162