Hitachi DZ-HS903A, DZ-HS803A instruction manual 104, Division, press PHOTO/SELECT

Editing

If you do not need to change the dividing scene, press the confirmation button again.

The selected scene will be played

4back.

•If you press MENU before pressing the confirmation button, the Submenu appears (p.103).

When you reach the desired point of

5division, press PHOTO/SELECT.

The confirmation screen appears.

Select “YES”, then press the confirmation button.

The selected scene will be divided, then the display will return to the

6“Divide Scene” screen.

•To quit division, select “NO” before pressing the confirmation button. The playback pause screen will appear. Press Cto quit.

Hints

•Search and frame advance (p.54) are useful when designating division points.

•If a fade has been added to the original scene, the “IN” effect will be added to the first half of the scene, and the “OUT” effect, to the latter half (p.106).

•Combining scenes that were divided will restore the original scene.

Notes

•Scenes with the skip setting cannot be played, therefore, you cannot specify the dividing point. Remove the skip setting first to divide.

•The actual point of division may shift 0.5 seconds forward/ backward from the point you have specified.

•If the division point is at the start or end of a scene, a message indicating this appears and division cannot be made.

•A movie scene of 0.5 seconds or less cannot be divided.

•If free space available on the HDD/DVD is insufficient, division will not be possible. Delete unnecessary scenes.

•If you divide a scene with the dub mark “ ”, the dub marks will appear on both divided scenes.

104