Removal and Replacement Procedures

3.Remove the drive activity light/battery power light cable and speaker cable from the retaining clips in the top cover 1 and 2 (Figure 5-25).

4.Remove the strip of tape 3 that secures the speaker assembly and TouchPad cables to the top cover and TouchPad assembly.

5.Remove the PM2.0 × 4.0 screw 4 that secures the speaker assembly to the top cover.

6.Lift the speaker assembly straight up 5 and remove it from the top cover.

Figure 5-25. Removing the Speaker Assembly

Reverse the above procedure to install the speaker assembly.

5–32

Maintenance and Service Guide

Page 158
Image 158
Compaq N800C manual Reverse the above procedure to install the speaker assembly