Compaq N800C manual Reverse the above procedure to install the fan

Removal and Replacement Procedures

2.Disconnect the fan cable from the system board 1 (Figure 5-29).

3.Loosen the four PM2.0 × 9.0 shoulder screws 2 that secure the fan to the processor mounting bracket.

✎These screws are secured to the fan and should not be removed.

4.Lift the fan straight up to remove it from the base enclosure 3.

Figure 5-29. Removing the Fan

Reverse the above procedure to install the fan.

Maintenance and Service Guide 5–39