Installation
Continued
5.Locate pegs on the bottom of crossover log (#5). Slide these pegs into the holes located in crossover log (#4) and front log (#1). See Figure 27.
For CCL3018PR/NR Only: Locate holes on the bottom of crossover log (#5). Slide the holes over the left pegs on middle log (#2) and front log (#1). See Figure 28.
6.Locate pegs on the bottom of crossover log (#6). Slide these pegs into the holes located in middle log (#2) and front log (#1). See Figure 29.
7.For CCL3930PR/NR only, locate holes on the bottom of crossover log (#7). Slide onto the pegs located in crossover log (#6) and middle log (#2). See Figure 30.
8.Add lava rock around base of heater if de- sired. Do not place any lava rock on logs or burner.
Pegs
Log #2
Log #3
Figure 26 - Installing Crossover Log (#4)
(CCL3930PR/NR Shown)
Crossover
Log (#4)
Front Log (#1)
Figure 27 - Installing Crossover Log (#5)
(CCL3930PR/NR Shown)
Crossover
Log (#4)
Front Log (#1)
Figure 28 - Installing Crossover Log (#5) (CCL3018PR/PRA and CCL3018NR/NRA Only)
Pegs
6
Log #2
Front Log (#1)
Figure 29 - Installing Crossover Log (#6)
(CCL3930PR/NR Shown)
Holes
Crossover
Log (#6)
7
Pegs
Middle Log (#2)
Figure 30 - Installing Crossover Log (#7) to Models CCL3930PR/PRA and CCL3930NR/NRA Only
18 | www.desatech.com |
