Removing the Top Cover Screws | Compaq N800C specs

Removal and Replacement Procedures

3.Remove the nine PM2.0 × 8.0 screws 1 securing the top cover to the base enclosure (Figure 5-21).

4.Remove the PM2.0 × 4.0 screw 2 securing the top cover to the base enclosure in the hard drive bay.

✎Do not remove the screw in the middle of the hard drive bay 3.

Figure 5-21. Removing the Top Cover Screws

5.Turn the notebook top side up with the rear panel facing forward.

5–27