Hitachi DZ-HS803A, DZ-HS903A instruction manual Additional Information 171

Fig. 1

− Block noise in playback image,

momentary stop of playback image	Al l scenes	1/ 6
− Sound interrupted during playback, or
abnormal sound
− Blue thumbnail display* (Fig. 1)	PLAY PHOTO SELECT
− Disc cannot correctly be recognized
		Block noise
− Disc cannot be initialized
		*

−Delay between video and audio

−A recording of one scene may be divided into plural scenes, or a portion of a scene may not be recorded

−Recording/Playback is not possible

Note when transferring this camcorder or discarding discs and SD memory cards

•The “Format” function on this camcorder will only change the file control information. It will not completely delete the data in the built-in hard disk and your personal data could leak out. To prevent the data from leaking out, execute complete deletion of the HDD following the procedures below.

1 While the camcorder is in HDD record pause mode, press , then press MENU.

2 Press f/eto select “HDD Setting”, then press c.

3 Press f/eto select “Full Format”, then press the confirmation button.

4 Press dto select “YES”, and then press the confirmation button to confirm the setting and begin HDD full format.

•“Formatting” or “deletion” using the functions of the camcorder or a PC will change only the file control information. It will not completely delete the data on disc or memory card.

•When transferring or discarding a disc or memory card, it is recommended that you physically destroy it or use deletion exclusive software (generally available) to completely delete the data on it. It is user's responsibility to control the data on disc and memory card.

•Hitachi will not accept any responsibility for leaking of personal data.

Additional Information

171