Hitachi ED-X52 user manual Turning off the power, STANDBY/ON button

Turning off the power

1. Press the STANDBY/ON button on the projector or the remote control.

The message “Power off?” will appear on the screen for about 5 seconds.

2. Press the STANDBY/ON button again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.

3. Attach the lens cover, after the POWER indicator turns in steady orange.

STANDBY/ON button

POWER indicator

ENGLISH

Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.

WARNING ►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.

►Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible.

NOTE • Please power off the projector after any connected devices are powered off.

•This projector has the AUTO POWER OFF function that can make the projector turn off automatically. For more information, please see the “Operating Guide” in the CD.

•When you attach or remove the lens cover, move it vertically up and down while keeping the knob to the right as illustrated in the fi gure.

11