English
DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY
WARNING: Never attempt to assemble or disassemble the depressed center wheel, unless the power switch is in the “OFF” position and the electrical cord has been disconnected from the receptacle.
1. Assembly
(1)Turn the disc grinder upsidedown so that the spindle is facing upward.
(2)Align the
(3)Fit the protuberance of the depressed center wheel onto the wheel washer.
(4)Screw the wheel nut onto the spindle.
(5) While pushing the push button with one | Wrench |
| |
hand, lock the spindle by turning the | Wheel Nut | Tighten | |
depressed center wheel slowly with the | |||
Depressed Center | |||
other hand. |
| ||
Tighten the wheel nut by using the supplied | Wheel |
| |
wrench as shown in Fig. 5. |
|
|
CAUTION: Tighten the wheel nut securely and confirm that the depressed center wheel does not wobble.
2.Disassembly
To remove the depressed center wheel, simply reverse the
Wheel Washer
Spindle
Wheel
Guard
Fig. 5
Push
Button
14
