Hitachi H 45MR instruction manual Tamping Rammer Shank Code No

English

◯Asphalt Cutting

(1)Cutter (SDS max shank type)

Overall Length	15-3/4" (400 mm)
Code No.	313475

◯Scooping Work

(1)Scoop (SDS max shank type)

	Overall Length	15-3/4" (400 mm)
	Code No.	313476
◯ Surface Roughing

(1) Bushing Tool	(2) Shank
(Code No. 313477)	(Code No. 313479)

◯Tamping

(1) Rammer	(2) Shank
(Code No. 313478)	(Code No. 313479)

◯Hammer Grease A

70 g (in a tube) (Code No. 981840)

30 g (in a tube) (Code No. 308471)

NOTE:

Specifications are subject to change without any obligation on the part of the HITACHI.

17