English
13.Never use a tool which is defective or operating abnormally.
If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.
14.Never leave tool running unattended. Turn power off. Don’t leave tool until it comes to a complete stop.
15.Carefully handle power tools.
Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged.
16.Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine, carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly.
17.ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI Standard Z87.1.
18.NEVER touch the tool bit with bare hands after operation.
19.NEVER wear gloves made from materials likely to roll up such as cotton, wool, cloth or string, etc.
20.ALWAYS attach the side handle and securely grip the Demolition Hammer.
21.ALWAYS be careful with buried object such as an underground wiring. Touching live wiring or electric cable with this tool may result in electric shock. Confirm before use whether hidden objects are present, such as electric cables within the wall, floor or ceiling.
22.Definitions for symbols used on this tool V ............. volts
Hz ........... hertz
A ............. amperes
no .......... no load speed W ............ watt
............ Class II Construction
........... Alternating current
7
