5) MESSAGE RTN : Message display ON/OFF
ON : A message indicating the result of AWB/ABB execution in the DIRECT mode is displayed.
OFF : A message indicating the result of AWB/ABB execution in the DIRECT mode is not displayed.
6) REMOTE : Set remote control baud rate
Use R and L to set for 2400, 4800, 9600 or 19200 bps. Set to 9600 bps when using the optional
7) REMOTE TYPE : Selects between modes 1 and 2.
MODE 1: Select to use the same computer commands as other camera models (e.g.,
MODE 2: Normal setting. Use for the
8)ID/TITLE : Change to ID/TITLE menu
9)Pixel correct : White flaw compensation on/off
Normally set to on. When image processing equipment is used, since the data of 1
pixel are not precise, the off setting might provide better results in such cases.
17. ID/TITLE
ID and title display position and data setting menu. 1) ID : ID display position setting
Once an ID is assigned, it becomes possible to control a particular camera unit remotely from a personal computer according to its ID. That is, multiple camera units can be
At this function item, specify whether the ID is displayed on screen or not. In case that the ID is displayed on screen, specify its display position also.
OFF : Not displayed. |
|
|
|
|
|
| TOP TITLE |
| TOP ID |
| |
TOP : Displayed at the upper right corner |
|
|
|
|
|
|
|
|
|
| |
of screen. |
|
|
|
|
|
BOTTOM : Displayed at the lower right |
|
|
|
|
|
corner of screen. |
|
|
|
|
|
2) At this function item, specify whether the |
|
|
|
|
|
TITLE is displayed on screen or not. In case |
| BOTTOM TITLE |
| BOTTOM ID |
|
|
|
|
|
| |
|
|
|
|
| |
that the TITLE is displayed on screen, specify |
| ID/TITLE Display Position | |||
its display position also. |
| ||||
OFF : Not displayed.
TOP : Displayed at the upper left corner of screen.
31
