Hitachi HV-D30 operation manual Gain control



2.After adjustment and operation with the RC-Z3, neglecting the Store operation before cutting off the power loses the adjustment and setting item data. The output is the designated file data prior to adjustment and operation.

Be sure to conduct the Store operation when desiring to save the data after adjustment and operation.

In this case, the data prior to Store are deleted.

0	R GAIN and		B GAIN control

	Red and blue video signal gain can be adjusted. Press the ENABLE			 button
	(lights) to allow adjusting.
	Adjustment is coarse when the WHITE BALANCE mode select switch			 is set to
	Preset and fine when set to Memory.

 R BLACK and  B BLACK control

Red and blue video signal black level can be adjusted. Press the ENABLE (lights) to allow adjusting.

Note: When CAM MODE AUTO, R & B black cannot be adjusted.

button

 ENABLE button

ON : Button lights to indicate R & B gain and R & B black adjustments are effective.

OFF: Adjustments are ineffective when the ENABLE button is extinguished. Note: When CAM MODE AUTO, the ENABLE button is ineffective.

 TALLY/CALL button

TALLY/CALL button lights when pressed. However, function is ineffective in the HV-D30 camera.

 SHUTTER button

Shutter on/off; lights when on.

Note: When CAM MODE AUTO, the Shutter button is ineffective.

 CONTRAST button Contrast on/off; lights when on.

Note: Inoperative with gamma off (gamma set to off at SUB MENU 2 of menu mode).

 ULTRA GAIN button

Ultra gain on/off. However, function is ineffective in the HV-D30 camera.

 A WHT button

Direct mode: At White balance mode MEM, press A.WHT to conduct automatic white balance (button lights). The resulting data are stored in application file memory.

  Menu mode: A.WHT button operation is inhibited.

42