Hitachi HV-D30 Input/Output Signals, Input signal conditions, Output signal ratings



Input/Output Signals

1. Input signal conditions

1)Genlock input (MULTI connector)

㨯 VBS	1.0 Vp-p	3 dB or black burst/75	or high (BNC)
(sync 0.3		0.1 Vp-p, burst 0.3 0.1 Vp-p)
㨯 HD/VD	2 to 5 Vp-p, negative (D-sub connector)

Note: Genlock input and Sync output are selected by internal input/output switch.

2)External trigger input (MULTI connector)

Ext Trig Low 0 VDC, High 2 to 5 VDC

3)Serial data (REMOTE connector)

1.5Vp-p 3 dB/High (when connected to RC-Z3, JU-C20, JU-Z2)

RS-232C level (when connected to personal computer) Note: Set internal switches according to connected equipment.

A level converter JU-C20 is required if controlling the camera from a personal computer via RS-232C interface over a distance more than approx.15 meter.

2.Output signal ratings

1)Component video output (VIDEO, MULTI connector) VBS 1.0 Vp-p/75

2)Y/C output (MULTI connector)

Y:1.0 Vp-p/75

C:NTSC 0.286 Vp-p (burst)/75

PAL 0.3 Vp-p (burst)/75

3)Component output (MULTI connector) Y : 1.0 Vp-p/75

R-Y: 0.7 Vp-p/75

B-Y: 0.7 Vp-p/75

4)RGB output (MULTI connector)

R:0.7 Vp-p/75

G:0.7 Vp-p/75

B:0.7 Vp-p/75

Note: YC/VBS, component and RGB MULTI connector outputs are selected by menu.

5)Sync outputs (MULTI connector) HD: 2 Vp-p/75

VD: 2 Vp-p/75

Sync: 2 Vp-p/75

Note: Genlock input and Sync output are selected by internal input/output switch.

50