Hitachi HV-D30 operation manual Gamma

8)Y SAT: Increase yellow color level

9)G SAT: Increase green color level

10)C SAT: Increase cyan color level

11)B SAT: Increase blue color level

12)M SAT: Increase magenta color level

The above items can be set in the range of -32 to +31. Respectively press the R button to increase and the L button to decrease the color level. Each item can be set to 0 by simultaneously pressing the L and R buttons for about 2 seconds.



13)Initialize : Returns level menu settings to preset values. Simultaneously press L and R for about 2 seconds.



14)File select : Selects scene files 1 - 4 and preset.

10.GAMMA

Menu for setting the gamma parameters. If dark component contrast is inadequate, adjusting the gamma parameters allows detailed adjustment of the Sub-menu 2 Contrast (Off, Normal, High).

1) GAMMA TABLE : Sets gamma rising slope.

Low	: Dark component gradation reduced.
Standard	: Standard setting
High	: Dark component gradation increased.

2) TOTAL GAMMA : Sets total (R, G and B) gamma point

Setting range is from -128 to 127. Press R to raise and L to lower RGB video signal gamma point. Simultaneously press the L and R buttons for about 2 seconds to set to 0.

3) R ADJUST : Sets red gamma point.

Setting range is from -128 to 127. Press R to raise and L to lower red video signal gamma point. Simultaneously press the L and R buttons for about 2 seconds to set to 0.

4) B ADJUST : Sets blue gamma point.

Setting range is from -128 to 127. Press R to raise and L to lower blue video signal gamma point. Simultaneously press the L and R buttons for about 2 seconds to set to 0.

5)Initialize : Returns level menu settings to preset values. Simultaneously press L and R for about 2 seconds.



6) File select : Selects scene files 1 - 4 and preset.

24