Hitachi L46S603 Source, Signal Strength, Add Channels to List, Channel List, New Channel Scan

Channels

Select Channels to set your signal source options, run New Channel Scan, Check Signal Meter and Set Channel List (Add channels to List, Channel/Labels and Favorite Channels).

Video		Source			Air
Audio		Signal Strength
Setup		New Channel Scan
		Add Channels to List
Channels		Channel List
Multimedia		Channel Labels
		Favorite Channels
Move	SEL	Select	Return	EXIT	Exit
1. Press CURSOR PAD ,			to highlight functions.
2. Press the SELECT button or CURSOR PAD					to select.
Video		Source			Air
Audio		Signal Strength
Setup		New Channel Scan
		Add Channels to List
Channels		Channel List
Multimedia		Channel Labels
		Favorite Channels
Move	SEL	Select	Return	EXIT	Exit

Source

Select the signal Source for the TV. When using an indoor or outdoor antenna select Air. When using a cable system select Cable.

Signal Strength

Select Signal Strength when using an indoor or outdoor antenna. This feature will show the signal strength of the Antenna signal to help you adjust your antenna to optimize signal reception. Use the MENU button or EXIT button to return.

Add Channels to List

This function allows you to add channels to the channel memory. Sometimes adjusting the antenna direction will allow reception of additional channels.

Video	Searching, Please wait ...
Audio	Searching Digital CH		Channel 3
Setup
	Analog Channels Found		1
Channels	Digital Channels Found		3
Multimedia	10%
Move	SEL Select	Return	EXIT Exit

1.Use the CURSOR PAD to select the Add Channels to List.

2.Press the SELECT button to start scanning.

3.Press the EXIT button to return to normal viewing.

Only the Channels that have been added to the list will be stored.

Channel List

This function allows you to review which channels have been added to the Channel List.

Video		Channel List
Audio	Ch 3-0		Skip
Setup	Ch 5-0		View
	Ch 6-1 XETV-DT		View
Channels	Ch 10-0		View
Multimedia	Ch 15-0		View
	Ch 31-1 KNSD-HD		View
Move	SEL Select	Return	EXIT Exit

NOTE

The Signal Strength meter will not be available (grayed out) when watching analog channels.

1.	Use the CURSOR PAD to navigate the Channel List.
2.	Press the SELECT or ￿ button to select Skip or View.

New Channel Scan

This feature will automatically store active Analog and Digital channels to the Channel list. This scan will erase all channels previously stored in the list.

Video	Source		Air
Audio	Signal Strength
Setup	New Channel Scan
	Add Channels to List
Channels	Channel List
Multimedia	Channel Labels
	Favorite Channels
Move	SEL Select	Return	EXIT Exit

1.Use the CURSOR buttons to highlight then press SELECT key to start.

NOTE	If you do not want to erase all scanned channels,
	please use the Add Channels to List option instead.

3. Press the EXIT button to return to normal viewing.

The Channel List cannot be updated by only changing the cable source. Auto Channel Scan must be performed for the Channel List to be updated.

40