Using Spreadsheets for Universal Volume Manager Operations 6-9 Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide Layer Column
in
Spread
sheet
Parameter Setting Range of
Values
Number of
Characters
F Capacity Capacity of the LDEV in blocks.
When the emulation type is OPEN-V,
specify the value in the range of 96000
and 8589934592.
When the emulation type is other than
OPEN-V, specify one of the following:
If the capacity of the external volume is
larger than the base LDEV capacity,
specify the base data area capacity.
If the capacity of the external volume is
equal or smaller than the base LDEV
capacity, specify the value that is
calculated by subtracting the control
information area capacity from the
capacity of the external volume. In this
case, one LDEV will be created in the
external volume.
Also, make sure that the capacity of the
external volume is greater than or equal to
the capacity that is the sum of the total
capacity of all the LDEVs in the external
volume and the control information area
capacity.
For details on the values for each
emulation type, see Required Volume
Capacity for Each Emulation Type.
1 to
8589934592
10 decimal
digits or
less
G SSID
SSID assigned to the range of the LDEV
numbers.
Specify the SSID written in the file that
you saved by using the SSID tag. When
you create an LDEV that does not have
any SSID, specify an SSID that is not
written in this file. For details on an SSID,
see the Virtual LVI/LUN & Volume
Shredder User's Guide.
0004 to FFFE 4
hexadecim
al digits or
less