English

(2)Pull the trigger to drive a nail with keeping your face and hands away from the nose muzzle.

(3)Remove finger from the trigger.

Remove the nailer from workpiece and reposition into the next pre-punched metal hole.

Repeat same process.

(4)When charge the nail length, remove the all nails in the magazine.

WARNING

￿Keep your finger off the trigger except during nailing operation, because serious injury could result if the push lever accidentally contacts you or others in work area.

￿Keep hands and body away from the discharge area. The nail may bounce from the recoil of driving a nail, possibly causing injury.

NOTE:

￿THIS is a SEQUENTIAL TRIP MECHANISM, and should be used in accordance with all warnings and instructions.

￿Always handle nails and package carefully. If nails are dropped, collating paper may be broken.

￿After nailing:

1)disconnect air hose from the Nailer;

2)remove all nails from the Nailer;

3)supply 5 – 10 drops of Hitachi pneumatic tool lubricant into the air plug on the Nailer; and

4)open the petcock on the air compressor tank to drain any moisture.

— 15 —