![](/images/new-backgrounds/1213739/21373927x1.webp)
Driving
This nailer is equipped with the push lever and dose not operate unless the push lever is depressed(upward position).
There are two methods of operation to drive nails with this nailer.
(1) Single sequential actuation(Trigger fire)
WARNING
⬤First nail is driven regardless of the contact action.
1 Pull the trigger
2Depress the push lever
(2)Contact action
1 Pull the trigger
•Position the nail outlet on the workpiece with finger off the trigger.
•Depress the push lever firmly it is completely depressed.
•Pull the trigger to drive a nail.
•Remove finger from the trigger.
To drive another nail, move the Nailer along the workpiece and repeat this procedure.
•Pull the trigger with the Nailer off the work piece.
•Depress the push lever against the workpiece to drive a nail.
•Move the Nailer along the workpiece with a bouncing motion. Each depression of the push lever will drive a nail.
As soon as the desired number of nails have been driven, remove finger from the trigger.
2Depress the push lever
WARNING
⬤Keep your finger off the trigger except during fastening operation, beacuse serious injury could result if the push lever accidentally contacts you or others in work area.
⬤Keep hands and body away from the discharge area. The nailer with contact trip mechanism may bounce from the recoil of driving a fastener and unwanted subsequent fastener may be driven, possibly causing injury.
⬤Some types of loaded nails can spark out of the muzzle during a nail driving operation. Exericise caution!
Nose cap
Nose
Push lever
Slot
Put the nose cap accordingly. Pushing it into the top of push
lever can put the nose cap.
Nose cap can be removed from the push lever using a screwdriver or thin rod.
Push lever
Nose cap | Screwdriver |
Nose cap |
|
Nose cap can be stored on the magazine as shown below. |
|
.
Magazine | Nose cap |
– 14 – |
|