MAINTENANCE
NOTE:
The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer. Some illustrations in this Manual may show details or attachments that differ from those on your own Nailer.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (page 4 – 6 ).
WARNING
⬤Disconnect air hose and remove all nails from Nailer when:
1)doing maintenance and inspection; and
2)clearing a jam.
⬤Never use gasoline or other highly flammable liquids for cleaning
1.Clearing a jam
Hammer
| Remove a jammed nail in the following order: |
| 1 DISCONNECT AIR HOSE. |
| 2 Open the nail guide |
Rod | 3 Insert a rod into the outlet. |
Tap the rod with a hammer |
Outlet | Nail Guide |
4Remove the jammed nail with a slotted screwdriver
Slotted Screwdriver
5Cut the deformed collated wire/plastic sheet with nippers. Correct the deformation.
6 In case of frequent jam, contact a Hitachi authorizes service center.
2. | Inspect the feeders | |
| リー | 1 DISCONNECT AIR HOSE. |
| � |
|
| フ | 2 Clean the knob sliding part. |
|
| |
|
| Lubricate it with Hitachi pneumatic tool lubricant |
| Nail guide | Knob |
– 16 –
